Product Detail:

In the high viscosity of emulsion, especially the manufacturing process of cream, ointment, emulsion products, usually the most problematic is the dispersed phase particle size and mixing the air mixed with products, grain size is too large a everywhere emulsion instability, lack luster; products into the air will make the products bubble, bacterial contamination, easy oxidation and the appearance is not smooth. For the two in question, our developed ZJR series vacuum homogeneous gasification unit, by the quality agitator blade mixing, scraping the wall, the center has stirred their complement each other, are combined into a mixing the best way, to achieve the perfect mixed products. The color and the vacuum pumping mode, so that the production for export in the mixing process of no air bubbles, which can produce shiny, delicate and good ductility of high quality products.

In the process of producing emulsion with high viscosity, there are two important problems.

  • One is the scattered bigger diameter particles.
  • The other is the air which will mix into the material during the mixing. Particles of the large diameter will lead to the labile state of the materials. If the air goes into the material, the material will be mixed with bubble, polluted by bacterium, easily oxidized and obtained  an rough appearance .

Regarding to these two problems, our factory had developed ZJR Vacuum Mixer Homogenizer Series which are made up of homogenizer & middle blade stirrer & scraper residues stirrer to form the best mixing way in order to produce the perfect mixed material.  By extracting air from the material, the vacuum pump can ensure that the material is glossy, exquisite and ductile.


Working Elements:

After the materials are heated & mixed in water pot and oil pot, they are drawn into the emulsifying boiler by the vacuum pump. Adopting the middle stirrer & Teflon scrapers, the emulsifying boiler can sweep the residues on the wall of the boiler. Then the materials are cut off, compressed and folded by the blades. By the strong cutting off force and the impact and turbulent current from the high-speed shear wheel and fixed cutting case, the materials are cut off and turned to particles of 200 nm- 2 um promptly. Because the emulsifying boiler is under vacuum state, the bubbles that are produced in the course of mixing will be taken away in time.




The pot cover is of automatic rising type. The material is directly drawn into the emulsifying boiler from oil boiler and water boiler. The discharge is based on the turning of the emulsifying boiler. And the heating system is electric heating and steam heating by the heating pipe, so the temperature is controlled automatically. Put the cool water into the intercalated bed so as to cool the material, which is simple and convenient (there is a warm layer outside the intercalated bed). The homogenizer and the stirring blades can work together or separately. The material sliming, emulsification, mixing, dispersing, etc. can be finished in a short time. Some parts of the machine are made of high-quality stainless steel (316L material will be adopted for medical use; the interior surface adopts mirror polish, vacuum agitating device is hygienically made according to the normal hygiene standard of GMP and is the most idea production equipment).


Name ZJR-1000 ZJR-1300
Emulsifying Pot Design Volume (L) 1000 1300
Capacity (L) 800 1000
Scraper Stirring Power (KW) 4 4
Scraper Stirring Speed (rpm) 0-45 0-45
Homogenizer Power (KW) 15 18.5
Electrical Heating Power (KW) 24 24
Homogenizer Speed (rpm) 2800 2800
Water Pot Design Volume (L) 650 800
Capacity (L) 500 650
Power (KW) 1.5 1.5
Speed (rpm) 960 960
Electrical Heating Power (KW) 18 18
Oil Pot Design Volume (L) 500 650
Capacity (L) 400 500
Power (KW) 1.5 1.5
Speed (rpm) 960 960
Electrical Heating Power (KW) 18 18


Name ZJR-1000L ZJR-1300L
Length Width Height Length Width Height
Emulsifying Pot Rack 2700 1350 3230-4700 2800 1500 2960-4560
Water and Oil Pot Rack 2700 1250 2150 2800 1320 2200
Table 2700 850 2400 850
Overall 3750 3620 3230-4700 4900 3320 2960-4560
Name ZJR-2000
Emulsifying Pot Design Volume (L) 2000
Capacity (L) 1600
Scraper Stirring Power (KW) 7.5
Scraper Stirring Speed (rpm) 0-45
Homogenizer Power (KW) 30
Electrical Heating Power (KW) 30
Homogenizer Speed (rpm) 2800
Water Pot Design Volume (L) 1200
Capacity (L) 960
Power (KW) 2.2
Speed (rpm) 960
Electrical Heating Power (KW) 24
Oil Pot Design Volume (L) 950
Capacity (L) 760
Power (KW) 2.2
Speed (rpm) 960
Electrical Heating Power (KW) 24


Name ZJR-2000
Length Width Height
Emulsifying Pot Rack 3250 1250 3300-4800
Water and Oil Pot Rack 3250 1600 2225
Table 3250 1500
Overall 4800 4400 3300-4800

Leave a Reply

Your email address will not be published. Required fields are marked *

Post comment