The high-shear emulsifier, as its name suggests, is a machine that can cut materials at high speed. It can fully refine and stir the material, that is, the machine that can cut and stir the material at high speed and emulsify. The homogenized head or homogenizer and emulsifier are the core parts of it. Therefore, when using, maintaining and maintaining, pay special attention to the cleaning and maintenance of the homogenizer. Let’s take a look at some cleaning and maintenance suggestions!
In the high-shear emulsifier, pay more attention to keeping the homogenizer clean and hygienic:
When the machine is not used or another material is to be replaced, in order to ensure the cleanliness of the production of the next batch of materials, the homogenizer part needs to be cleaned as required. The parts of the homogenizer that are in contact with the working fluid should be cleaned as required, especially the cutting wheel, cutting sleeve, sliding bearing and bushing in the uniform bushing, which should be removed, cleaned and installed. After cleaning and reassembling, turn the impeller by hand, there should be no stuck phenomenon. After the two flanges of the pot body and the lid are relatively fixed, the motor of the homogenizer is turned correctly, and no other abnormalities can be started. In addition, it should be noted that since the homogenizing head has a high rotational speed, it can not be operated in the empty pot state in the emulsification pot, so as to avoid the degree of sealing after local heating.